Assembly and Installation Instructions
Bench assembly requires two adults to ensure proper assembly and safety.Bench assembly requires two adults to ensure proper assembly and safety.
1. Customer should assemble bench on a flat, level surface where proper assembly and drying can take place. Please make sure the bench seat is centered on the legs with the bench seat extending about an inch on the ends
2. Remove bench seat and clean all debris from top of legs and bottom of bench seat. Apply a liberal amount of Liquid Nails to the tops of legs. For additional cleaning and gluing recommendations, please refer to Liquid Nails directions for use.
3. Carefully place bench seat back onto legs, making sure to re-center on the legs.
4. Allow to dry undisturbed for 24 hrs.
After assembly and drying is complete, bench will become one piece with a weight of approximately 70 lbs. Bench may be moved to different areas, but may require two persons to do so.
Maintenance and Care Instructions
To clean, use soap and water only. Do not use solvents. Take care when mowing and trimming around the legs of the benches, so as not to chip them. This item should NOT be exposed to freezing conditions. This is not a commercial grade bench.